Users Guide
● ipv6-address — Enter the IPv6 address of the neighbor in the x:x:x:x::x format. The :: notation specifies
successive hexadecimal fields of zero.
● interface interface — Enter interface then the interface type and slot/port or number information:
○ For a 10-Gigabit Ethernet interface, enter TenGigabitEthernet then the slot/port/subport[/subport]
information.
○ For a 40-Gigabit Ethernet interface, enter fortyGigE then the slot/port information.
○ For a port channel interface, enter port-channel then a number.
○ For a VLAN interface, enter vlan then a number from 1 to 4093.
Defaults None.
Command Mode EXEC
Usage
Information
The no version of this command resets the value to the default.
Example
OS10# show ipv6 neighbors
pv <vlan-id> – private vlan where the mac is originally learnt
IPv6 Address Hardware Address State Interface Egress Int
--------------------------------------------------------------------------------
1111::30 14:18:77:09:e5:49 reachable vlan100 port-channel1000
fe80::1618:77ff:fe09:e549 14:18:77:09:e5:49 reachable vlan100 port-channel1000
fe80::1618:77ff:fe09:e549 14:18:77:09:e5:49 reachable vlan101 port-channel1000
Supported
Releases
10.4.1.0 or later or later
show ipv6 route
Displays IPv6 routes.
Syntax
show ipv6 route [vrf vrf-name] [all | bgp | connected | static | A::B/mask
| summary]
Parameters
● vrf vrf-name — (Optional) Enter vrf then the name of the VRF to display IPv6 routes
corresponding to that VRF. If you do not specify this option, routes corresponding to the default VRF
display.
● all—(Optional) Displays all routes including nonactive routes.
● bgp—(Optional) Displays BGP route information.
● connected—(Optional) Displays only the directly connected routes.
● static—(Optional) Displays all static routes.
● A::B/mask—(Optional) Enter the IPv6 destination address and mask.
NOTE: This option works only for the exact prefix and the mask length.
● summary—(Optional) Displays the IPv6 route summary.
Default Not configured
Command Mode EXEC
Usage
Information
None
Example (All)
OS10# show ipv6 route all
Codes: C - connected
S - static
B - BGP, IN - internal BGP, EX - external BGP
O - OSPF,IA - OSPF inter area, N1 - OSPF NSSA external type 1,
N2 - OSPF NSSA external type 2, E1 - OSPF external type 1,
E2 - OSPF external type 2, > - non-active route
Gateway of last resort is not set
Destination Gateway Dist/Metric Last Change
---------------------------------------------------------
924 Layer 3