Users Guide
Default None
Command Mode EXEC
Usage
Information
None
Example
OS10# show ipv6 ospf
Routing Process ospfv3 200 with ID 1.1.1.1
It is an Area Border Router
Min LSA origination 5000 msec, Min LSA arrival 1000 msec
Min LSA hold time 0 msec, Max LSA wait time 0 msec
Number of area in this router is 2, normal 2 stub 0 nssa
Area (0.0.0.0)
Number of interface in this area is 1
SPF algorithm executed 42 times
Area (0.0.0.1)
Number of interface in this area is 1
SPF algorithm executed 42 times
OS10# show ipv6 ospf 200
Routing Process ospfv3 200 with ID 10.0.0.2
Min LSA origination 5000 msec, Min LSA arrival 1000 msec
Min LSA hold time 0 msec, Max LSA wait time 0 msec
Number of area in this router is 1, normal 1 stub 0 nssa
Area (0.0.0.0)
Number of interface in this area is 1
SPF algorithm executed 3 times
Supported
Releases
10.3.0E or later
show ipv6 ospf database
Displays all LSA information. You must enable OSPFv3 to generate output.
Syntax
show ipv6 ospf process-id [vrf vrf-name] database
Parameters
● process-id — Enter the OSPFv3 process ID to view a specific process. If you do not enter a
process ID, the command applies to all the configured OSPFv3 processes.
● vrf vrf-name — Enter the keyword vrf followed by the name of the VRF to display LSA
information for that VRF.
Default Not configured
Command Mode EXEC
Usage
Information
● Link ID—Identifies the router ID.
● ADV Router—Identifies the advertising router’s ID.
● Age—Displays the LS age.
● Seq#—Identifies the LS sequence number. This identifies old or duplicate LSAs.
● Checksum—Displays the Fletcher checksum of an LSA’s complete contents.
● Link count—Displays the number of interfaces for that router.
● Rtr Count—Displays the router count.
● Dest RtrID—Displays the destination router ID.
● Interface—Displays the interface type.
● Prefix—Displays the prefix details.
Example
OS10# show ipv6 ospf database
OSPF Router with ID (10.0.0.2) (Process ID 200)
Router Link States (Area 0.0.0.0)
ADV Router Age Seq# Fragment ID Link count Bits
-------------------------------------------------------------------
1.1.1.1 1610 0x80000144 0 1 B
2.2.2.2 1040 0x8000013A 0 1
10.0.0.2 1039 0x80000002 0 1
982 Layer 3