Users Guide

how you configure the new priority for the tracked state. When the tracked state comes up, VRRP restores the original priority
for the virtual router group.
Figure 6. Object tracking
Interface tracking
You can create an object that tracks the line-protocol state of an L2 interface, and monitors its operational up or down status.
You can configure up to 500 objects. Each object is assigned a unique ID.
When the link-level status goes down, the tracked resource status is also considered Down. If the link-level status goes up, the
tracked resource status is also considered Up. For logical interfaces such as port-channels or VLANs, the link-protocol status is
considered Up if any physical interface under the logical interface is Up.
The list of available interfaces include:
● ethernet — Physical interface
● port-channel — Port-channel identifier
● VLAN — Virtual local area network (VLAN) identifer
● Loopback — Loopback interface identifier
● mgmt — Management interface
1. Configure object tracking in CONFIGURATION mode, from 1 to 500.
track object-id
986
Layer 3