API Guide

If successfully establishing connectivity between the VTEP and the NSX controller, the console displays the current connection status
between the controller and the management IP address of the VTEP.
3. Create a logical switch.
You can create a logical network that acts as the forwarding domain for virtualized and nonvirtualized server workloads on the physical
and virtual infrastructure.
The following steps configure the logical switch for NSX controller management.
a. Click Logical Switches from the left navigation pane.
b. Click the green + icon under Logical Switches. The New Logical Switch dialog window opens.
c. Enter a name and select Unicast as the replicate mode and click OK
164
Controller-provisioned VXLAN