API Guide

Usage information If an MP-BGP network uses 4-byte autonomous systems or to specify the RD and RT values, manually configure
EVPN instances and associate each EVI with the overlay VXLAN virtual network. The EVI activates only when you
configure the VXLAN network ID (VNI), RD, RT, and virtual network.
Example
OS10(config)# evpn
OS10(config-evpn)# evi 10
OS10(config-evpn-evi)#
Supported
releases
10.4.2.0 or later
evpn
Enables the EVPN control plane for VXLAN.
Syntax
evpn
Parameters None
Default Not configured
Command mode CONFIGURATION
Usage information Enabling EVPN triggers BGP to advertise EVPN capability with AFI=25 and SAFI=70 to all BGP peers in an
autonomous system. The no version of this command disables EVPN on the switch.
Example
OS10(config)# evpn
OS10(config-evpn)#
Supported
releases
10.4.2.0 or later
rd
Configures the Route Distinguisher (RD) value that EVPN routes use.
Syntax
rd {A.B.C.D:[1-65535] | auto}
Parameters
A.B.C.D:
[1-65535]
Manually configure the RD with a 4-octet IPv4 address, then a 2-octet-number from 1 to
65535.
auto
Configure the RD to automatically generate.
Default Not configured
Command mode EVPN-EVI and EVPN-VRF
Usage information A RD maintains the uniqueness of an EVPN route between different EVPN instances. Configure a route
distinguisher in a tenant VRF used for EVPN symmetric IRB traffic. The RD auto-configures as Type 1 from the
overlay network source IP address and the auto-generated EVPN instance ID.
The rd auto command is not supported in EVPN-VRF mode. When you create a VRF in EVPN mode, the RD is
automatically generated. The rd A.B.C.D:[1-65535] command is supported in EVPN-VRF mode in 10.5.1
and later releases.
Example
OS10(config)# evpn
OS10(config-evpn)# evi 10
OS10(config-evpn-evi)# vni 10000
OS10(config-evpn-evi)# rd 111.111.111.111:65535
OS10(config)# evpn
OS10(config-evpn)# vrf vrf-blue
OS10(config-evpn-vrf-vrf-blue)# rd 111.111.111.111:65000
BGP EVPN for VXLAN 65