Reference Guide

U - Up (port-channel)
Group Port-Channel Type Protocol Member Ports
22 port-channel22 (U) Eth STATIC 1/1/10(P) 1/1/11(P) 1/1/14(P) 1/1/16(P)
1/1/19(P)
23 port-channel23 (D) Eth STATIC
Supported Releases 10.2.0E or later
show port-group
Displays the current port-group conguration on a switch.
Syntax
show port-group
Parameters None
Default None
Command Mode EXEC
Usage Information To view the ports that belong to each port group, use the show port-group command. To congure a port
group, enter the port-group command.
Example: S4148U-
ON
OS10(config)# show port-group
port-group mode ports
1/1/1 Eth 10g-4x 1 2 3 4
1/1/2 FC 16g-2x 5 6 7 8
1/1/3 FC 16g-2x 9 10 11 12
1/1/4 FC 16g-2x 13 14 15 16
1/1/5 FC 16g-2x 17 18 19 20
1/1/6 FC 16g-2x 21 22 23 24
1/1/7 Eth 100g-1x 25
1/1/8 Eth 40g-1x 26
1/1/9 Eth 100g-1x 29
1/1/10 Eth 40g-1x 30
Supported Releases 10.3.1E or later
show switch-operating-mode
Displays the current operating mode of a supported switch.
Syntax
show switch-operating-mode
Parameters None
Command Mode EXEC
Usage Information Some OS10 switches operate in Full Switch and SmartFabric modes. The default is Full Switch mode.
Example
OS10# show switch-operating-mode
Switch-Operating-Mode : Smart Fabric Mode
Supported Releases 10.4.0E(R3) or later
Interfaces 111