Reference Guide

show switch-port-prole
Displays the current and default port prole on a switch.
Syntax
show switch-port-profile node/slot
Parameters
• node/slot — Enter the switch information. For a standalone switch, enter 1/1.
Default
profile-1
Command Mode EXEC
Usage Information A switch-port prole determines the available front-panel ports and breakout modes on Ethernet and unied ports.
To display the current port prole, enter the show switch-port-profile command. To reset the switch to
the default port prole, enter the no switch-port-profile node/slot command.
Example
OS10(config)# show switch-port-profile 1/1
| Node/Unit | Current | Next-boot | Default |
|-------------+-------------------+-------------------|
| 1/1 | profile-2 | profile-2 | profile-1 |
Supported Profiles:
profile-1
profile-2
profile-3
profile-4
profile-5
profile-6
Supported Releases 10.3.1E or later
show unit-provision
NOTE
: This command will be supported in future releases.
Syntax
show unit-provision
show vlan
Displays the current VLAN conguration.
Syntax
show vlan [vlan-id]
Parameters vlan-id — (Optional) Enter a VLAN ID (1 to 4093).
Default Not congured
Command Mode EXEC
Usage Information None
Example
OS10# show vlan
Codes: * - Default VLAN, M - Management VLAN, R - Remote Port Mirroring VLANs
Q: A - Access (Untagged), T - Tagged
112 Interfaces