Reference Guide

Congure FIP snooping
1 Enable the FIP snooping feature globally using the feature fip-snooping command in CONFIGURATION mode.
2 Before applying FIP snooping to a VLAN, ensure that the VLAN already contains Ethernet or LAG members that are enabled with FCF
port mode. You can enable FCF mode on an Ethernet or port-channel using the fip-snooping port-mode fcf command in
INTERFACE mode.
3 Enable FIP snooping on the VLAN using the fip-snooping enable command in VLAN INTERFACE mode. You can apply FIP
snooping on a maximum of 12 VLANs.
4 Add FC map to the VLAN with the fip-snooping fc-map fc-map command.
5 Congure the maximum number of ENode sessions using the fcoe max-sessions-per-enodemac max-session-number
command in CONFIGURATION mode.
Conugure FIP snooping bridge
OS10(config)# feature fip-snooping
OS10(config)# interface ethernet 1/1/32
OS10(conf-if-eth1/1/32)# fip-snooping port-mode fcf
OS10(conf-if-eth1/1/32)# exit
OS10(config)# interface vlan 100
OS10(conf-if-vl-100)# fip-snooping enable
OS10(conf-if-vl-100)# fip-snooping fc-map 0xEFC64
OS10(conf-if-vl-100)# exit
OS10(config)# fcoe max-sessions-per-enodemac 64
View FIP snooping conguration details
OS10# show fcoe statistics interface vlan 100
Number of Vlan Requests :0
Number of Vlan Notifications :0
Number of Multicast Discovery Solicits :2
Number of Unicast Discovery Solicits :0
Number of FLOGI :2
Number of FDISC :16
Number of FLOGO :0
Number of Enode Keep Alive :9021
Number of VN Port Keep Alive :3349
Number of Multicast Discovery Advertisement :4437
Number of Unicast Discovery Advertisement :2
Number of FLOGI Accepts :2
Number of FLOGI Rejects :0
Number of FDISC Accepts :16
Number of FDISC Rejects :0
Number of FLOGO Accepts :0
Number of FLOGO Rejects :0
Number of CVL :0
Number of FCF Discovery Timeouts :0
120
Fibre channel