Reference Guide
Parameters
interface-type — (Optional) Enter the interface type. The interface may be
ethernet, VLAN, or port-channel.
Default Not congured
Command Mode EXEC
Usage Information If you do not specify the interface interface-type information, then the command clears the statistics
for all the interfaces and VLANs.
Example
OS10# clear fcoe statistics interface ethernet 1/1/1
OS10# clear fcoe statistics interface port-channel 5
Supported Releases 10.4.0E(R1) or later
fc alias
Creates an FC alias. After creating the alias, you can add members to the FC alias.
Syntax
fc alias alias-name
Parameters alias-name — Enter a name for the FC alias.
Defaults Not congured
Command Mode CONFIGURATION
Usage Information
The no version of this command deletes the FC alias. To delete an FC alias, rst remove it from the FC zone.
Example
OS10(config)# fc alias test
OS10(config-fc-alias-test)# member wwn 21:00:00:24:ff:7b:f5:c9
OS10(config-fc-alias-test)# member wwn 20:25:78:2b:cb:6f:65:57
Supported Releases 10.3.1E or later
fc zone
Creates an FC zone and adds members to the zone. An FC zone can have a maximum of 527 unique members.
Syntax
fc zone zone-name
Parameters zone-name — Enter a name for the zone.
Defaults Not congured
Command Mode CONFIGURATION
Usage Information
The no version of this command deletes the FC zone. To delete an FC zone, rst remove it from the FC zoneset.
Example
OS10(config)# fc zone hba1
OS10(config-fc-zone-hba1)# member wwn 10:00:00:90:fa:b8:22:19
OS10(config-fc-zone-hba1)# member wwn 21:00:00:24:ff:7b:f5:c8
Supported Releases 10.3.1E or later
Fibre channel 127