Reference Guide
Supported Releases 10.3.1E or later
fcoe max-sessions-per-enodemac
Congures the maximum number of sessions allowed for an ENode.
Syntax
fcoe max-sessions-per-enodemac max-session-number
Parameters max-session-number — Enter the maximum number of sessions to be allowed, ranging from 1 to 64.
Defaults 32
Command Mode CONFIGURATION
Usage Information
The no version of this command resets the number of sessions to the default value.
Example
OS10(config)# fcoe max-sessions-per-enodemac 64
Supported Releases 10.4.0E(R1) or later
feature fc
Enables the F_Port globally.
Syntax
feature fc domain-id domain-id
Parameters domain-id — Enter the domain ID of the F_Port, from 1 to 239.
Defaults Disabled
Command Mode CONFIGURATION
Usage Information
The no version of this command disables the F_Port. You can disable the F_Port only when vfabric and zoning
congurations are not available. Before disabling the F_Port, remove the vfabric and zoning congurations.
Example
OS10(config)# feature fc domain-id 100
Supported Releases 10.3.1E or later
feature fc npg
Enables the NPG mode globally.
Syntax
feature fc npg
Parameters None
Defaults Disabled
Command Mode CONFIGURATION
Usage Information
The no version of this command disables the NPG mode. You can enable only any one of the following at a time:
F_Port, FIP snooping bridge, or NPG.
Fibre channel 129