Reference Guide

• Enable fast start repeat count which is the number of packets sent during activation in CONFIGURATION mode (1 to 10, default 3).
lldp-med fast-start-repeat-count number
Congure fast start repeat count
OS10(config)# lldp med fast-start-repeat-count 5
View LLDP conguration
• View the LLDP conguration in EXEC mode.
show running-configuration
• View LLDP error messages in EXEC mode.
show lldp errors
• View LLDP timers in EXEC mode.
show lldp timers
• View the LLDP trac in EXEC mode.
show lldp traffic
View running conguration
OS10# show running-configuration
View LLDP errors
OS10# show lldp errors
Total Memory Allocation Failures : 0
Total Input Queue Overflows : 0
Total Table Overflows : 0
View LLDP timers
OS10# show lldp timers
LLDP Timers:
Holdtime in seconds: 120
Reinit-time in seconds: 2
Transmit interval in seconds: 30
View LLDP global trac
OS10# show lldp traffic
LLDP traffic statistics:
Total Frames Out : 0
Total Entries Aged : 0
Total Frames In : 0
Total Frames Received In Error : 0
Total Frames Discarded : 0
Total TLVS Unrecognized : 0
Total TLVs Discarded : 0
View LLDP interface trac
OS10# show lldp traffic interface ethernet 1/1/1
LLDP Traffic Statistics:
Total Frames Out : 0
Total Entries Aged : 0
Total Frames In : 0
Total Frames Received In Error : 0
Total Frames Discarded : 0
Total TLVS Unrecognized : 0
Total TLVs Discarded : 0
LLDP MED Traffic Statistics:
Total Med Frames Out : 0
Layer 2
177