Reference Guide

Example
OS10(conf-router-bgp-2)# neighbor 32.1.0.0
OS10(conf-router-neighbor)#
Supported Releases 10.3.0E or later
next-hop-self
Disables the next-hop calculation for a neighbor.
Syntax
next-hop-self
Parameters None
Default Enabled
Command Mode ROUTER-NEIGHBOR-AF
Usage Information Inuences next-hop processing of EBGP routes to IBGP peers. The no version of this command disables the next-
hop calculation.
Example
OS10(conf-router-neighbor-af)# next-hop-self
Supported Releases 10.3.0E or later
non-deterministic-med
Compares paths in the order they arrive.
Syntax
non-deterministic-med
Parameters None
Default Disabled
Command Mode ROUTER-BGP
Usage Information Paths compare in the order they arrive. OS10 uses this method to choose dierent best paths from a set of paths,
depending on the order they are received from the neighbors. MED may or may not be compared between
adjacent paths. When you change the path selection from deterministic to non-deterministic, the path selection for
the existing paths remains deterministic until you use the clear ip bgp command to clear the existing paths.
The no version of this command congures BGP bestpath selection as non-deterministic.
Example
OS10(conf-router-bgp-10)# non-deterministic-med
Supported Releases 10.2.0E or later
outbound-optimization
Enables outbound optimization for IBGP peer-group members.
Syntax
outbound-optimization
Parameters None
Default Not congured
Command Mode ROUTER-BGP
296 Layer 3