Reference Guide

Command Mode EXEC
Usage Information This command provides output which displays locally advertised BGPv4 routes congured using the network
command. These routes show as r for redistributed/network-learned routes.
Example
OS10# show ip bgp ipv4 unicast summary
BGP router identifier 80.1.1.1 local AS number 102
Neighbor AS MsgRcvd MsgSent Up/Down State/Pfx
80.1.1.2 800 8 4 00:01:10 5
Supported Releases 10.3.0E or later
show ip bgp ipv6 unicast
Displays route information for BGP IPv6 routes.
Syntax
show ip bgp ipv6 unicast [neighbors] {ip-address/mask | summary} | multicast
{ip-address/mask | neighbors} [denied-routes]
Parameters
• neighbors — Displays IPv6 neighbor information.
• ip-address/mask — Displays information about IPv6 unicast routes.
• summary — Displays IPv6 unicast summary information.
• multicast ip-address/mask — Displays IPv6 multicast routes information.
• denied-routes — (Optional) Displays the congured IPv6 denied routes.
Default Not congured
Command Mode EXEC
Usage Information This command displays IPv6 BGP routing information.
Example
OS10# show ip bgp ipv6 unicast summary
BGP router identifier 80.1.1.1 local AS number 102
Neighbor AS MsgRcvd MsgSent Up/Down State/Pfx
80.1.1.2 800 8 4 00:01:10 5
Supported Releases 10.3.0E or later
show ip bgp neighbors
Displays information that BGP neighbors exchange.
Syntax
show ip bgp neighbors ip-address [denied-routes]
Parameters
• ip-address — Enter the IP address for a specic neighbor.
• denied-routes — (Optional) Displays the list of routes denied by policy.
• advertised-routes—Displays the routes advertised to neighbor
• dampened-routes—Displays the suppressed routes received from neighbor
• flap-statistics—Displays the route's ap statistics received from neighbor
• received-routes—Displays the routes received from neighbor
• routes—Displays routes learned from neighbor
Default Not congured
302 Layer 3