Reference Guide

interface breakout 1/1/18 map 40g-1x
interface breakout 1/1/19 map 40g-1x
interface breakout 1/1/20 map 40g-1x
interface breakout 1/1/21 map 40g-1x
interface breakout 1/1/22 map 40g-1x
interface breakout 1/1/23 map 40g-1x
interface breakout 1/1/24 map 40g-1x
interface breakout 1/1/25 map 40g-1x
interface breakout 1/1/26 map 40g-1x
interface breakout 1/1/27 map 40g-1x
interface breakout 1/1/28 map 40g-1x
interface breakout 1/1/29 map 40g-1x
interface breakout 1/1/30 map 40g-1x
interface breakout 1/1/31 map 40g-1x
interface breakout 1/1/32 map 40g-1x
ipv6 forwarding enable
username admin password $6$q9QBeYjZ$jfxzVqGhkxX3smxJSH9DDz7/3OJc6m5wjF8nnLD7/VKx8SloIhp4NoGZs0I/
UNwh8WVuxwfd9q4pWIgNs5BKH. role sysadmin
aaa authentication local
snmp-server contact http://www.dell.com/support
!
interface range ethernet 1/1/1-1/1/32
switchport access vlan 1
no shutdown
!
interface vlan 1
no shutdown
!
interface mgmt1/1/1
ip address dhcp
no shutdown
ipv6 enable
ipv6 address autoconfig
!
support-assist
!
policy-map type application policy-iscsi
!
class-map type application class-iscsi
!
class-map type qos class-trust
Show dierence between candidate and running congurations
OS10# show diff candidate-configuration running-configuration
OS10#
NOTE
: If the OS10# prompt does not return output, the candidate-configuration and running-configuration les
match.
Prevent conguration changes
You can prevent conguration changes on sessions other than the current CLI session using the lock command. Use the lock and
unlock commands in EXEC mode to respectively prevent and allow conguration changes on other sessions. When you enter the lock
command on a CLI session, users cannot make conguration changes across any other active CLI sessions. When you close the CLI session
on which you entered the lock command, conguration changes are automatically allowed on all other sessions.
Lock conguration changes
OS10# lock
Unlock conguration changes
OS10# unlock
36
Getting Started