Reference Guide

Process ID 200, Router ID 10.0.0.2, Network Type broadcast, Cost: 1
Transmit Delay is 1 sec, State DR, Priority 1
Designated Router (ID) 10.0.0.2, Interface address 10.0.0.2 (local)
Backup Designated router (ID) , Interface address 0.0.0.0
Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
Simple password authentication enabled
Neighbor Count is 0, Adjacent neighbor count is 0
Supported Releases 10.2.0E or later
show ip ospf routes
Displays OSPF routes received from neighbors along with parameters like cost, next-hop, area, interface, and type of route.
Syntax
show ip ospf [process-id] routes [prefix IP-prefix]
Parameters
• process-id — (Optional) Enter OSPFv2 Process ID to view information specic to the ID.
• IP-prefix — (Optional) Specify an IP address to view information specic to the IP address.
Default None
Command Mode EXEC
Usage Information Displays the cost metric for each neighbor and interfaces.
Example
OS10# show ip ospf 10 routes
Prefix Cost Nexthop Interface Area Type
110.1.1.0 1 0.0.0.0 vlan3050 0.0.0.0
intra-area
111.1.1.0 1 0.0.0.0 vlan3051 0.0.0.0
intra-area
111.2.1.0 1 0.0.0.0 vlan3053 0.0.0.0
intra-area
Supported Releases 10.2.0E or later
show ip ospf statistics
Displays OSPF trac statistics.
Syntax
• show ip ospf [instance-number] statistics [interface interface]
Parameters
• instance-number — (Optional) Enter an OSPF instance number (1 to 65535).
• interface interface — (Optional) Enter the interface information:
– ethernet node/slot/port[:subport] — Enter an Ethernet port interface.
– port-channel number — Enter the port-channel interface number (1 to 128).
– vlan vlan-id — Enter the VLAN ID number (1 to 4093).
Default Not congured
Command Mode EXEC
Usage Information This command displays OSPFv2 trac statistics for a specied instance or interface, or for all OSPFv2 instances
and interfaces.
Example
OS10# show ip ospf 10 statistics
Interface vlan3050
Layer 3 375