Reference Guide
Command Mode CONFIGURATION
Usage Information Set the interval to 0 to disable the refresh.
Example
OS10(conf-track-100)# reachability-refresh 600
Supported Releases 10.3.0E or later
show track
Displays tracked object information.
Syntax
show track [brief] [object-id] [interface] [ip | ipv6]
Parameters
• brief — (Optional) Displays brief tracked object information.
• object-id — (Optional) Displays the tracked object information for a specic object ID.
• interface — (Optional) Displays all interface object information.
• ip — (Optional) Displays all IPv4 next-hop object information.
• ipv6 — (Optional) Displays all IPv6 next-hop object information.
Defaults None
Command Mode CONFIGURATION
Usage Information None
Example (Brief)
OS10# show track brief
TrackID Resource Parameter Status LastChange
--------------------------------------------------------------------------
1 line-protocol ethernet1/1/1 DOWN 2017-02-03T08:41:25Z1
2 ipv4-reachablity 1.1.1.1 DOWN 2017-02-03T08:41:43Z1
3 ipv6-reachablity 10::10 DOWN 2017-02-03T08:41:55Z1
Supported Releases 10.3.0E or later
track
Congures and manages tracked objects.
Syntax
track object-id
Parameters object-id — Enter the object ID to track (up to 500).
Defaults Not congured
Command Mode CONFIGURATION
Usage Information The no version of this command deletes the tracked object from an interface.
Example
OS10# track 100
Supported Releases 10.3.0E or later
404 Layer 3