Reference Guide

Parameters string — Enter a description for the uplink-state group. A maximum of 32 characters.
Default Not congured
Command Mode UPLINK-STATE-GROUP
Usage Information The no version of this command removes the descriptive name.
Example
OS10(config)# uplink-state-group 1
OS10(conf-uplink-state-group-1)# name test_ufd_group
Supported Releases 10.4.0E(R3) or later
show running-conguration uplink-state-group
Displays the running conguration specic to uplink-state groups.
Syntax
show running-configuration uplink-state-group [group-id]
Parameters group-id — Enter the uplink group ID. The running conguration of the specied group ID displays.
Default Not congured
Command Mode EXEC
Usage Information None
Example
OS10# show running-configuration uplink-state-group
!
uplink-state-group 9
downstream ethernet1/1/53
downstream fibrechannel1/1/7
upstream ethernet1/1/34
upstream ethernet1/1/35
upstream ethernet1/1/36
upstream ethernet1/1/37
upstream fibrechannel1/1/1
Supported Releases 10.4.0E(R3) or later
show uplink-state-group
Displays congured uplink-state status.
Syntax
show uplink-state-group [group-id] [detail]
Parameters
• group-id — Enter the uplink group ID. The status of the specied group ID displays.
• detail — Displays detailed information on the status of the uplink-state groups.
Default Not congured
Command Mode EXEC
Usage Information None
Example
OS10# show uplink-state-group
Uplink State Group: 9, Status: Enabled,down
OS10# show uplink-state-group 9
480 System management