Reference Guide

Parameters
• name — Enter the name of the prex list.
• description — Enter the description for the named prex list.
Defaults Not congured
Command Mode CONFIGURATION
Usage Information The no version of this command removes the specied prex list.
Example
OS10(config)# ip prefix-list TEST description TEST_LIST
Supported Release 10.3.0E or later
ip prex-list deny
Creates a prex list to deny route ltering from a specied network address.
Syntax
ip prefix-list name deny [A.B.C.D/x [ge | le]] prefix-len
Parameters
• name — Enter the name of the prex list.
• A.B.C.D/x — (Optional) Enter the source network address and mask in /prex format (/x).
• ge — Enter to indicate the network address is greater than or equal to the range specied.
• le — Enter to indicate the network address is less than or equal to the range specied.
• prefix-len — Enter the prex length.
Defaults Not congured
Command Mode CONFIGURATION
Usage Information The no version of this command removes the specied prex-list.
Example
OS10(config)# ip prefix-list denyprefix deny 10.10.10.2/16 le 30
Supported Release 10.3.0E or later
ip prex-list permit
Creates a prex-list to permit route ltering from a specied network address.
Syntax
ip prefix-list name permit [A.B.C.D/x [ge | le]] prefix-len
Parameters
• name — Enter the name of the prex list.
• A.B.C.D/x — (Optional) Enter the source network address and mask in /prex format (/x).
• ge — Enter to indicate the network address is greater than or equal to the range specied.
• le — Enter to indicate the network address is less than or equal to the range specied.
• prefix-len — Enter the prex length.
Defaults Not congured
Command Mode CONFIGURATION
Usage Information The no version of this command removes the specied prex-list.
512 Access Control Lists