Reference Guide

• community-number — Enter the community number in aa:nn format, where aa is the AS number (2
bytes) and nn is a value specic to that AS.
Default Not congured
Command Mode ROUTE-MAP
Usage Information The no version of this command deletes a BGP COMMUNITY attribute assignment.
Example
OS10(config)# route-map bgp
OS10(conf-route-map)# set community none
Supported Releases 10.3.0E or later
set extcomm-list add
Add communities in the specied list to the EXT COMMUNITY attribute in a matching inbound or outbound BGP route.
Syntax
set extcomm-list extcommunity-list-name add
Parameter extcommunity-list-name — Enter the name of an established extcommunity list (up to 140 characters).
Defaults None
Command Mode ROUTE-MAP
Usage Information In a route map, use this set command to add an extended list of communities that pass a permit statement to the
EXT COMMUNITY attribute of a BGP route sent or received from a BGP peer. Use the set extcomm-list
delete
command to delete an extended community list from a matching route.
Example
OS10(config)# route-map bgp
OS10(conf-route-map)# set extcomm-list TestList add
Supported Releases 10.4.0E(R1) or later
set extcomm-list delete
Remove communities in the specied list from the EXT COMMUNITY attribute in a matching inbound or outbound BGP route.
Syntax
set extcomm-list extcommunity-list-name delete
Parameter extcommunity-list-name — Enter the name of an established extcommunity list. A maximum of 140
characters.
Defaults None
Command Mode ROUTE-MAP
Usage Information
To add communities in an extcommunity list to the EXT COMMUNITY attribute in a BGP route, use the set
extcomm-list add command.
Example
OS10(config)# route-map bgp
OS10(conf-route-map)# set extcomm-list TestList delete
Supported Releases 10.3.0E or later
Access Control Lists 553