Reference Guide
Parameters
• alias — Remove an alias denition.
• debug — Disable debugging.
• support-assist-activity — SupportAssist-related activity.
• terminal — Reset terminal settings.
Default Not congured
Command Mode EXEC
Usage Information Use this command in EXEC mode to disable or remove conguration. Use the no ? in CONFIGURATION mode to
view available commands.
Example
OS10# no notifications
Supported Releases 10.2.0E or later
reload
Reloads the software and reboots the ONIE-enabled device.
Syntax
reload
Parameters None
Default Not congured
Command Mode EXEC
Usage Information Use caution while using this command, as it reloads the OS10 image and reboots the device.
Example
OS10# reload
Proceed to reboot the system? [confirm yes/no]:y
Supported Releases 10.2.0E or later
show alias
Displays congured alias commands available in both persistent and non-persistent modes.
Syntax
show alias [brief | detail]
Parameters
• brief — Displays brief information of aliases.
• detail — Displays detailed information of aliases.
Default None
Command Mode EXEC
Usage Information None
Example
OS10# show alias
Name Type
---- ----
govlt Config
goint Config
56 Getting Started