Reference Guide

• interface ethernet node-id/slot/port-id [:subport] — Clears QoS statistics for an
Ethernet interface congured for qos, queuing, or control-plane.
Default Not congured
Command Mode EXEC
Usage Information None
Example
OS10# clear qos statistics type qos interface ethernet 1/1/5
Example (control-
plane)
OS10# clear qos statistics type control-plane interface ethernet 1/1/7
Example (queuing)
OS10# clear qos statistics type queuing interface ethernet 1/1/2
Supported Releases 10.2.0E or later
control-plane
Enters Control-Plane mode.
Syntax
control-plane
Parameters None
Default Not congured
Command Mode CONTROL-PLANE
Usage Information If you attach an access-list to the class-map type of control-plane, the access-list ignores the permit and
deny keywords.
Example (class-map)
OS10(config)# class-map type control-plane match-any c1
OS10(conf-cmap-control-plane)#
Example (policy-
map)
OS10(config)# policy-map type control-plane p1
OS10(conf-pmap-control-plane)#
Supported Releases 10.2.0E or later
owcontrol
Enables or disables link-level ow control on an interface.
Syntax
flowcontrol [receive | transmit] [on | off]
Parameters
• receive — (Optional) Indicates the port can receive ow control packets from a remote device.
• transmit — (Optional) Indicates the local port can send ow control packets to a remote device.
• on — (Optional) When used with receive, allows the local port to receive ow control trac. When used
with transmit, allows the local port to send ow control trac to the remote device.
• off — (Optional) When used with receive, disables the remote device from sending ow control trac to
the local port. When used with transmit, disables the local port from sending ow control trac to the
remote device.
578 Quality of service