Reference Guide

Parameters wred-profile-name — (Optional) Enter the Ethernet interface information.
Default Not congured
Command Mode EXEC
Usage Information None
Example
OS10# show qos wred-profile
Profile Name | Green | Yellow | Red|
MIN MAX DROP-RATE| MIN MAX DROP-RATE| MIN MAX DROP-RATE| WEIGHT| ECN|
KB KB %| KB KB %| KB KB %| | |
--------------------------------|-------------------------------|-------------------------------|--------|---------|
Supported Releases
system qos
Enters SYSTEM-QOS mode to congure system-level service policies.
Syntax
system qos
Parameters None
Default Not congured
Command Mode CONFIGURATION
Usage Information None
Example
OS10(config)# system qos
OS10(config-sys-qos)#
Supported Releases 10.2.0E or later
trust
Sets the dynamic classication to trust.
Syntax
trust {dot1p | diffserv} [fallback]
Parameters
• diffserv — Set the dynamic classication to trust DSCP.
• dot1p — Set the dynamic classication to trust Dot1p.
• fallback — (Optional) Honor trusting dot1p or DSCP only if other match criteria in this policy map does not
qualies for a packet.
Default Disabled
Command Mode POLICY-MAP-CLASS-MAP-QOS
Usage Information The ingress QoS policy type and class-trust support this command.
Example
OS10(conf-pmap-c-qos)# trust dot1p
Supported Releases 10.3.0E or later
Quality of service 603