Reference Guide

OS10(config-qos-map)# queue 3 qos-group 7
OS10(config-qos-map)#
Supported Releases 10.3.0E or later
trust-map
Applies a dot1p or dscp trac class to a queue trust map.
Syntax
trust {dot1p | dscp} trust-map-name
Parameters
• dot1p— Applies a dot1p trust map.
• dscp—Applies a dscp trust map.
Default Disabled
Command Mode
SYSTEM-QOS
INTERFACE
Usage Information Use the show qos maps type [tc-queue | trust-map-dot1p | trust-map-dscp] [string]
command to view the current trust mapping. You should change the trust map only during no trac ow, and
verify the correct policy maps are applied. The no version of this command returns the value to the default.
Example
OS10(config)# interface ethernet 1/1/1
OS10(conf-if-eth1/1/1)# trust-map dscp dscp-trustmap1
Supported Releases 10.3.0E or later
wred
Congures a weighted random early detection (WRED) prole.
Syntax
wred wred-profile-name
Parameters wred-profile-name — Enter a name for the WRED prole.
Default Not congured
Command Mode CONFIGURATION
Usage Information The no version of this command removes the WRED prole.
Example
OS10(config)# wred test_wred
OS10(config-wred)#
Supported Releases 10.4.0E(R1) or later
Quality of service 605