Reference Guide

Parameters command — Enter the Linux command to execute.
Default Not congured
Command Mode EXEC
Usage Information None
Example
OS10# system bash
admin@OS10:~$ pwd
/config/home/admin
admin@OS10:~$ exit
OS10#
Supported Releases 10.2.0E or later
system identier
Sets a non-default unit ID in a non-stacking conguration.
Syntax
system identifier system-identifier-ID
Parameters system-identifier-ID — Enter the system identier ID (1–9)
Default Not congured
Command Mode CONFIGURATION
Usage Information The system ID is displayed in the stack LED on the front panel.
Example
OS10(config)# system identifier 1
Supported Releases 10.3.0E or later
terminal
Sets the number of lines to display on the terminal and enables logging.
Syntax
terminal {length lines | monitor}
Parameters
• length lines — Enter the number of lines to display on the terminal (0 to 512, default 24).
• monitor — Enables logging on the terminal.
Default 24 terminal lines
Command Mode EXEC
Usage Information Enter zero (0) for the terminal to display without pausing.
Example
OS10# terminal monitor
Supported Releases 10.2.0E or later
Getting Started 69