Reference Guide

logging console
Disables, enables, or congures the minimum severity level for logging to the console.
Syntax
logging console {disable | enable | severity}
To set the severity to the default level, use the no logging console severity command. The default
severity level is log-notice.
Parameters severity — Set the minimum logging severity level:
• log-emerg — Set to unusable.
• log-alert — Set to immediate action is needed.
• log-crit — Set to critical conditions.
• log-err — Set to error conditions.
• log-warning — Set to warning conditions.
• log-notice — Set to normal but signicant conditions (default).
• log-info — Set to informational messages.
• log-debug — Set to debug messages.
Default Log-notice
Command Mode CONFIGURATION
Usage Information None
Example
OS10(config)# logging console disable
Example (Enable)
OS10(config)# logging console enable
Example (Severity)
OS10(config)# logging console severity log-warning
Supported Releases 10.2.0E or later
logging enable
Enables system logging.
Syntax
logging enable
To disable the logging capability, use the no logging enable command.
Parameters None
Default Enabled
Command Mode CONFIGURATION
Usage Information The no version of this command disables all logging.
Example
OS10(config)# logging enable
Supported Releases 10.2.0E or later
708 Troubleshoot OS10