Reference Guide

Parameters
• process-name — (Optional) Enter the process-name to use as a lter in syslog messages.
• line-numbers — (Optional) Enter the number of lines to include in the logging messages (1 to 65535).
Default None
Command Mode EXEC
Usage Information The output from this command is the /var/log/eventlog le.
Example (Log-File)
OS10# show logging log-file process-name dn_qos
Example (Process-
Names)
OS10# show logging process-names
dn_pas_svc
dn_system_mgmt_
dn_env_tmpctl
dn_pm
dn_eth_drv
dn_etl
dn_eqa
dn_alm
dn_eqm
dn_issu
dn_swupgrade
dn_ifm
dn_ppm
dn_l2_services
dn_dot1x
dn_l3_core_serv
dn_policy
dn_qos
dn_switch_res_m
dn_ospfv3
dn_lacp
dn_i3
dn_supportassis
--More--
Supported Releases 10.2.0E or later
show trace
Displays trace messages.
Syntax
show trace [number-lines]
Parameters number-lines — (Optional) Enter the number of lines to include in log messages (1 to 65535).
Default Enabled
Command Mode EXEC
Usage Information The output from this command is the /var/log/syslog le.
Example
OS10# show trace
May 23 17:10:03 OS10 base_nas: [NETLINK:NH-
EVENT]:ds_api_linux_neigh.c:nl_to_nei
gh_info:109, Operation:Add-NH family:IPv4(2) flags:0x0 state:Failed(32) if-idx:
4
May 23 17:10:03 OS10 base_nas: [NETLINK:NH-
EVENT]:ds_api_linux_neigh.c:nl_to_nei
gh_info:120, NextHop IP:192.168.10.1
May 23 17:10:04 OS10 base_nas: [NDI:NDI-SAI], Values are invalid - can't be
conv
Troubleshoot OS10 711