Reference Guide
eee
Enables or disables energy-ecient Ethernet (EEE) on physical ports.
Syntax
eee
Parameters None
Default Enabled on Base-T devices and disabled on S3048-ON and S4048T-ON.
Command Mode Interface
Usage Information To disable EEE, use the no version of this command.
Example (Enable
EEE)
OS10(config)# interface ethernet 1/1/1
OS10(conf-if-eth1/1/1)# eee
Example (Disable
EEE)
OS10(config)# interface ethernet 1/1/2
OS10(conf-if-eth1/1/2)# no eee
Supported Releases 10.3.0E or later
show interface eee
Displays the EEE status for all interfaces.
Syntax
show interface eee
Parameters None
Default Not congured
Command Mode EXEC
Example
OS10# show interface eee
Port EEE Status Speed Duplex
---------------------------------------------
Eth 1/1/1 off up 1000M
...
Eth 1/1/47 on up 1000M
Eth 1/1/48 on up 1000M
Eth 1/1/49 n/a
Eth 1/1/50 n/a
Eth 1/1/51 n/a
Eth 1/1/52 n/a
Supported Releases 10.3.0E or later
show interface eee statistics
Displays EEE statistics for all interfaces.
Syntax
show interface eee statistics
Parameters None
Default Not congured
92 Interfaces