Reference Guide
successful. IP 192.21.43.1/31 deleted successfully
 Mar 5 22:21:12 OS10 dn_l3_core_services[590]: Node.1-Unit.1:PRI:notice 
[os10:trap], %Dell EMC (OS10) %log-notice:IP_ADDRESS_DEL: IP Address delete is 
successful. IP 2000:21:43::21:43:1/127 deleted successfully
 Mar 5 22:21:12 OS10 dn_l3_core_services[590]: Node.1-Unit.1:PRI:notice 
[os10:trap], %Dell EMC (OS10) %log-notice:IP_ADDRESS_DEL: IP Address delete is 
successful. IP 192.28.43.1/31 deleted successfully
 Mar 5 22:21:12 OS10 dn_l3_core_services[590]: Node.1-Unit.1:PRI:notice 
[os10:trap], %Dell EMC (OS10) %log-notice:IP_ADDRESS_DEL: IP Address delete is 
successful. IP 2000:28:43::28:43:1/127 deleted successfully
 Mar 5 22:21:12 OS10 dn_l3_core_services[590]: Node.1-Unit.1:PRI:notice 
[os10:trap], %Dell EMC (OS10) %log-notice:IP_ADDRESS_DEL: IP Address delete is 
successful. IP 192.41.43.1/31 deleted successfully
 Mar 5 22:21:12 OS10 dn_l3_core_services[590]: Node.1-Unit.1:PRI:notice 
[os10:trap], %Dell EMC (OS10) %log-notice:IP_ADDRESS_DEL: IP Address delete is 
successful. IP 2000:41:43::41:43:1/127 deleted successfully
 Mar 5 22:21:12 OS10 dn_ifm[602]: Node.1-Unit.1:PRI:notice [os10:trap], %Dell 
EMC (OS10) %log-notice:IFM_OSTATE_UP: Interface operational state is up :vlan1
OS10(config)# interface range ethernet 1/1/1-1/1/4
OS10(conf-range-eth1/1/1-1/1/4)# show configuration
 !
 interface ethernet1/1/1
 no shutdown
 switchport access vlan 1
 !
 interface ethernet1/1/2
 no shutdown
 switchport access vlan 1
 !
 interface ethernet1/1/3
 no shutdown
 switchport access vlan 1
 !
 interface ethernet1/1/4
 no shutdown
 switchport access vlan 1
OS10(conf-range-eth1/1/1-1/1/4)#
Supported releases
10.4.0E(R1) or later
default vlan-id
Recongures the VLAN ID of the default VLAN.
Syntax
default vlan-id vlan-id
Parameters vlan-id — Enter the default VLAN ID number (1 to 4093).
Default VLAN 1
Command Mode CONFIGURATION
Usage Information By default, VLAN 1 serves as the default VLAN for switching untagged L2 trac on OS10 ports in trunk or access 
mode. If VLAN 1 is used for data trac for network-specic needs, recongure the VLAN ID of the default VLAN. 
The command recongures the access VLAN ID (default VLAN) of all ports in switchport access mode.
Example
OS10(config)# default vlan-id 10
OS10(config)# do show running-configuration
...
!
interface vlan1
no shutdown
98 Interfaces










