Users Guide

Example
OS10(conf-pmap-c-qos)# police cir 5 bc 30 pir 20 be 40
Supported
Releases
10.2.0E or later
policy-map
Enters QoS POLICY-MAP mode and creates or modifies a QoS policy-map.
Syntax
policy-map policy-map-name [type {qos | queuing | control-plane |
application | network-qos }]
Parameters
● policy-map-name — Enter a class name for the policy-map. A maximum of 32 characters.
● type — Enter the policy-map type.
○ qos — Create a qos policy-map type.
○ queuing — Create a queueing policy-map type.
○ control-plane — Create a control-plane policy-map type.
○ application — Create an application policy-map type.
○ network-qos — Create a network-qos policy-map type.
Defaults qos = class-map type and match-any = class-map filter
Command Mode CONFIGURATION
Usage
Information
The no version of this command deletes a policy-map.
Example
OS10(config)# policy-map p1
Example
(Queuing)
OS10(config)# policy-map type queuing p1
Supported
Releases
10.2.0E or later
priority
Sets the scheduler as a strict priority.
Syntax
priority
Parameters None
Default WDRR — when priority is mentioned, it moves to SP with default level 1.
Command Mode POLICY-MAP-CLASS-MAP
Usage
Information
If you use this command, bandwidth is not allowed. Only the egress QoS policy type supports this
command.
Example
OS10(config-pmap-c-que)# priority
Supported
Releases
10.2.0E or later
priority-flow-control mode
Enables or disables Priority Flow-Control mode on an interface.
Syntax
priority-flow-control mode [on]
1230 Quality of service