Users Guide

1 1
2 2
3 3
4 4
5 5
6 6
7 7
OS10#
Example (dscp)
OS10# show qos trust-map dscp new-dscp-map
new-dscp-map
qos-group Dscp
Id
-------------------
0 0-7
1 8-15
2 16-23
3 24-31
4 32-39
5 40-47
6 48-55
7 56-63
Supported
Releases
10.3.0E or later
show qos maps (Z9332F-ON)
Displays the QoS maps configuration of the dot1p-to-traffic class, DSCP-to-traffic class, and traffic-class to queue mapping in
the device.
Syntax
show qos maps type tc-queue
Parameters
● qos — Enter to view either an ingress or egress QoS configuration
● maps — Enter to view QoS mapping information
● type— (Optional)Enter to view Qos map types
● tc-queue — Enter to view the traffic class-to-queue map
Default NA
Command Mode EXEC
Usage
Information
The command applies to the Z9332F-ON only. The command provides priority-to-traffic-class and traffic-
class-to-queue mapping, both default and user configured. The Type column displays the queue type
corresponding to the traffic-class-to-queue map entry. For platforms other than Z9332F-ON, the Both
displays in the Type column to indicate that the mapping applies to both unicast and multicast queues.
Example
show qos maps type tc-queue
Traffic-Class to Queue Map: sundar
Queue Traffic-Class Type
------------------------------------------
2 2-5 Unicast
0-2 0 Multicast
Supported
Releases
10.5.0 or later
show qos port-map details
Displays port to port pipe and MMU mapping.
Syntax
show qos port-map details [interface interface-type]
Quality of service 1251