Users Guide

Example
OS10# show lldp timers
LLDP Timers:
Holdtime in seconds: 120
Reinit-time in seconds: 6
Transmit interval in seconds: 30
Supported
Releases
10.2.0E or later
show lldp tlv-select interface
Displays the TLVs enabled for an interface.
Syntax
show lldp tlv-select interface ethernet node/slot/port[:subport]
Parameters ethernet node/slot/port[:subport] — Enter the Ethernet interface information, from 1 to 253.
Default Not configured
Command Mode EXEC
Usage
Information
None
Example
OS10# show lldp tlv-select interface ethernet 1/1/1
port-description
system-capabilities
system-description
system-name
port-vlan
mac-phy-config
link-aggregation
max-frame-size
vlan-name
Supported
Releases
10.2.0E or later
show lldp traffic
Displays LLDP traffic information including counters, packets that are transmitted and received, discarded packets, and
unrecognized TLVs.
Syntax
show lldp traffic [interface ethernet node/slot/port[:subport]]
Parameters interface ethernet node/slot/port[:subport] — (Optional) Enter the Ethernet interface
information to view the LLDP traffic.
Default Not configured
Command Mode EXEC
Usage
Information
None
Example
OS10# show lldp traffic
LLDP Traffic Statistics:
Total Frames Out : 1504
Total Entries Aged : 2
Total Frames In : 67
Total Frames Received In Error : 0
Total Frames Discarded : 0
Total TLVS Unrecognized : 0
Total TLVs Discarded : 0
458 Layer 2