Users Guide

ip host vrf
Configures a hostname for the management VRF instance or a non-default VRF instance and maps the hostname to an IPv4 or
IPv6 address.
Syntax
ip host vrf {management | vrf-name} hostname {IP-address | Ipv6–address}
Parameters
● management—Enter the keyword management to configure a hostname for the management VRF
instance.
● vrf-name—Enter the name of the non-default VRF instance to configure a hostname for that VRF
instance.
● hostname—Enter the hostname.
● IP-address | Ipv6–address—Enter the host IPv4 or IPv6 address.
Default Not configured
Command Mode CONFIGURATION
Usage
Information
The no version of this command removes the hostname from the management or non-default VRF
instance.
Example
OS10(config)# ip host vrf management dell 10.1.1.1
or
OS10(config)# ip host vrf blue dell 10.1.1.1
Supported
Releases
10.4.0E(R1) or later
ip http vrf
Configures an HTTP client for the management or non-default VRF instance.
Syntax
ip http vrf {management | vrf vrf-name}
Parameters
● management — Enter the keyword to configure an HTTP client for the management VRF instance.
● vrf vrf-name — Enter the keyword then the name of the VRF to configure an HTTP client for that
non-default VRF instance.
Default Not configured
Command Mode CONFIGURATION
Usage
Information
The no version of this command removes the management VRF instance configuration from the HTTP
client.
Example
OS10(config)# ip http vrf management
OS10(config)# ip http vrf vrf-blue
Supported
Releases
10.4.0E(R1) or later
ip name-server vrf
Configures a DNS name server for the management VRF instance or a non-default VRF instance.
Syntax
ip name-server vrf {management | vrf-name}
Parameters
● management—Enter the keyword management to configure a DNS name server for the
management VRF instance.
● vrf-name—Enter the name of the non-default VRF instance to configure a DNS name server for
that VRF instance.
Default Not configured
Layer 3 545