Users Guide

Supported
Releases
10.4.0E(R1) or later
ipv6 nd other-config-flag
Sends RA messages that tell hosts to use stateful autoconfiguration to obtain nonaddress-related information.
Syntax
ipv6 nd other-config-flag
Parameters None
Defaults Not configured
Command Mode INTERFACE
Usage
Information
The no version of this command disables the other-config-flag option in RA messages.
Example
OS10(config)# interface ethernet 1/2/3
OS10(conf-if-eth1/2/3)# ipv6 nd other-config-flag
Supported
Releases
10.4.0E(R1) or later
ipv6 nd prefix
Configures the IPv6 prefixes that are included in messages to neighboring IPv6 routers.
Syntax
ipv6 nd prefix {ipv6-prefix | default} [no-advertise] [no autoconfig]
[no-rtr-address] [off-link] [lifetime {valid-lifetime seconds | infinite}
{preferred-lifetime seconds | infinite}]
Parameters
● ipv6-prefix — Enter an IPv6 prefix in x:x::y/mask format to include the prefix in RA mesages.
Include prefixes that are not already in the subnets on the interface.
● default — Configure the prefix parameters advertised in all subnets configured on the interface.
● no-advertise — (Optional) Do not advertise the specified prefix. By default, all prefixes in
configured subnets advertise.
● no-autoconfig — (Optional) Sets AdvAutonomous to Off for the specified prefix in the
radvd.conf file. This setting tells hosts to not use this prefix for address autoconfiguration. By default,
AdvAutonomous is On.
● no-rtr-address — (Optional) Sets AdvRouterAddr to Off for the prefix in the radvd.conf file.
The Off setting tells hosts to not use the advertising router's address for on-link determination. By
default, AdvRouterAddr is On.
● off-link — (Optional) Sets AdvOnLink to Off for the prefix in the radvd.conf file. The Off
setting tells hosts to not use this prefix for on-link determination. By default, AdvOnLink is On.
● lifetime {valid-lifetime seconds | infinite} — (Optional) Sets
AdvValidLifetime in seconds for the prefix in the radvd.conf file. The prefix is valid for on-link
determination only for the specified lifetime. The default is 86400 seconds (1 day). The infinite
setting allows the prefix to be valid for on-link determination with no time limit.
● lifetime {preferred-lifetime seconds | infinite} — (Optional) Sets
AdvPreferredLifetime in seconds for the prefix in the radvd.conf file. IPv6 addresses generated
from the prefix using stateless autoconfiguration remain preferred for the configured lifetime. The
default is 14400 seconds (4 hours). The infinite setting allows addresses that are autoconfigured
using the prefix to be preferred with no time limit.
Defaults All prefixes in IPv6 subnets configured on an interface advertise.
Command Mode INTERFACE
Usage
Information
● By default, all prefixes configured in IPv6 addresses on an interface advertise. To advertise all default
parameters in the subnet prefixes on an interface, enter the default keyword.
676 Layer 3