Users Guide

Outgoing interface list:
(22.1.1.10, 224.1.1.1), uptime 00:02:58, expires 00:03:06, flags: P
Incoming interface: ethernet1/1/31, RPF neighbor 3.3.3.2
Outgoing interface list:
IGMP and PIM states in LHR node
The show ip igmp groups command output displays the IGMP database.
LHR# show ip igmp groups
Total Number of Groups: 1
IGMP Connected Group Membership
Group Address Interface Mode Uptime
Expires Last Reporter
224.1.1.1 vlan2001 IGMPv2-Compat 00:00:01
00:01:59 15.1.1.10
LHR#
LHR# show ip pim tib
PIM Multicast Routing Table
Flags: S - Sparse, C - Connected, L - Local, P - Pruned,
R - RP-bit set, F - Register Flag, T - SPT-bit set, J - Join SPT,
K - Ack-Pending state
Timers: Uptime/Expires
Interface state: Interface, next-Hop, State/Mode
(*, 224.1.1.1), uptime 00:00:05, expires 00:00:54, RP 192.168.1.25, flags: SCJ
Incoming interface: ethernet1/1/29, RPF neighbor 1.1.1.2
Outgoing interface list:
vlan2001 Forward/Sparse 00:00:05/Never
(22.1.1.10, 224.1.1.1), uptime 00:00:05, expires 00:03:24, flags: T
Incoming interface: ethernet1/1/17, RPF neighbor 2.2.2.2
Outgoing interface list:
vlan2001 Forward/Sparse 00:00:05/Never
LHR# show ip pim mcache
PIM Multicast Routing Cache Table
(*, 224.1.1.1)
Incoming interface : ethernet1/1/29
Outgoing interface list :
vlan2001
(22.1.1.10,224.1.1.1)
Incoming interface : ethernet1/1/17
Outgoing interface list :
vlan2001
PIM-SSM sample configuration
This section describes how to enable PIM-SSM using the topology show in the following illustration.
820
Multicast