Users Guide

Default Not configured
Command Mode EXEC
Usage
Information
Use this command to view the IPv6 static and connected routes configured for the Management port.
Use the management route command to configure an IPv4 or IPv6 management route.
Example
OS10# show ipv6 management-route
Destination Gateway State
----------- ------- -----
2001:34::0/64 ManagementEthernet 1/1 Connected
2001:68::0/64 2001:34::16 Active
Supported
Releases
10.2.2E or later
show license status
Displays license status information.
Syntax
show license status
Parameters None
Default Not configured
Command Mode EXEC
Usage
Information
Use the show license status command to verify the current license for running OS10, its duration,
and the service tag assigned to the switch.
Example
OS10# show license status
System Information
---------------------------------------------------------
Vendor Name : DELL EMC
Product Name : S4148F-ON
Hardware Version : X01
Platform Name : x86_64-dell_s4100_c2338-r0
PPID : TW09H9MN282987130026
Service Tag : 9531XC2
Product Base :
Product Serial Number:
Product Part Number :
License Details
----------------
Software : OS10-Enterprise
Version : 10.5.0.0
License Type : PERPETUAL
License Duration: Unlimited
License Status : Active
License location: /mnt/license/9531XC2.lic
--------------------------------------------------------
Supported
Releases
10.3.0E or later
show running-configuration
Displays the configuration currently running on the device.
Syntax
show running-configuration [aaa | access-list | as-path | bfd | bgp
[vrf vrf-name] [neighbor {ip-address | interface interface-type | class-
map | community-list | compressed | control-plane | crypto | dot1x |
extcommunity-list | evpn | fefd | igmp | interface [virtual-network vn-id]
86 CLI Basics