Reference Guide

Ethernet 1/1/21 unassigned NO unset up down
Ethernet 1/1/22 unassigned NO unset up down
Ethernet 1/1/23 unassigned NO unset up down
Ethernet 1/1/24 unassigned NO unset up down
Ethernet 1/1/25 unassigned NO unset up down
Ethernet 1/1/26 unassigned NO unset up down
Ethernet 1/1/27 unassigned NO unset up down
Ethernet 1/1/28 unassigned NO unset up down
Ethernet 1/1/29 unassigned NO unset up down
Ethernet 1/1/30 unassigned NO unset up down
Ethernet 1/1/31 unassigned NO unset up down
Ethernet 1/1/32 unassigned NO unset up down
Management 1/1/1 10.16.153.226/24 YES manual up up
Vlan 1 unassigned NO unset up down
Vlan 10 unassigned NO unset up down
Vlan 20 unassigned NO unset up down
Vlan 30 unassigned NO unset up down
View VLAN conguration
OS10# show vlan
Codes: * - Default VLAN, M - Management VLAN, R - Remote Port Mirroring VLANs,
@ – Attached to Virtual Network
Q: A - Access (Untagged), T - Tagged
NUM Status Description Q Ports
1 Inactive A Eth1/1/1,1/1/6-1/1/32
10 Inactive
20 Inactive
22 Inactive
23 Active A Eth1/1/2
24 Inactive
25 Inactive
26 Inactive
27 Inactive
28 Inactive
29 Inactive
30 Inactive
Interface commands
channel-group
Assigns an interface to a port-channel group.
Syntax
channel-group channel-number mode {active | on | passive}
Parameters
• channel-number — Enter a port-channel number (1 to 128).
• mode — Sets the LACP actor mode.
• active — Sets channeling mode to active.
• on — Sets channeling mode to static.
• passive — Sets channeling mode to passive.
Default Not congured
Command Mode INTERFACE
Usage Information The no version of this command resets the value to the default, and unassigns the interface from the port-channel
group.
104 Interfaces