Reference Guide
clear lldp counters
Clears LLDP and LLDP-MED transmit, receive, and discard statistics from all the physical interfaces.
Syntax
clear lldp counters
Parameters None
Default Not congured
Command Mode EXEC
Usage Information The counter default value resets to zero for all physical interfaces.
Example
OS10# clear lldp counters
Supported Releases 10.2.0E or later
clear lldp table
Clears LLDP neighbor information for all interfaces.
Syntax
clear lldp table
Parameters None
Default Not congured
Command Mode EXEC
Usage Information Neighbor information clears on all interfaces.
Example
OS10# clear lldp table
Supported Releases 10.2.0E or later
lldp enable
Enables or disables LLDP globally.
Syntax
lldp enable
Parameters None
Default Enabled
Command Mode CONFIGURATION
Usage Information This command enables LLDP globally for all Ethernet (PHY) interfaces, except on those interfaces where LLDP is
manually disabled. The no version of this command disables LLDP globally irrespective of whether LLDP is
manually enabled on an interface.
Example
OS10(config)# lldp enable
Supported Releases 10.3.1E or later
192 Layer 2