Reference Guide

Default Not congured
Command Mode CONFIGURATION
Usage Information The community-name parameter indexes this command. If you do not congure this command, you cannot
query SNMP data. The no version of this command removes access to a community.
Example
OS10(config)# snmp-server community public ro
OS10(config)# snmp-server community public ro acl aclrule1
Supported Releases 10.2.0E or later
snmp-server contact
Congures contact information for troubleshooting this SNMP node.
Syntax
snmp-server contact text
Parameters text — Enter an alphanumeric text string (up to 55 characters).
Default Not congured
Command Mode CONFIGURATION
Usage Information The no version of this command deletes the SNMP server contact information.
Example
OS10(config)# snmp-server contact administrator
Supported Releases 10.2.0E or later
snmp-server enable traps
Enables SNMP traps on a switch.
Syntax
snmp-server enable traps [notification-type] [notification-option]
Parameters
• notification-type notification-option — Enter an SNMP notication type, and optionally, a
notication option for the type.
Table 8. Notication types and options
Notication type Notication option
entity — Enable entity change traps. None
envmon — Enable SNMP environmental
monitor traps.
– fan — Enable fan traps.
– power-supply — Enable power-supply traps.
– temperature — Enable temperature traps.
lldp — Enable LLDP state change traps.
– rem-tables-change — Enable the
lldpRemTablesChange trap.
snmp — Enable SNMP traps.
– authentication — Enable authentication traps.
– coldstart — Enable coldstart traps when you power on
the switch and the SNMP agent initializes.
– linkdown — Enable link-down traps.
– linkup — Enable link-up traps.
544 System management