Reference Guide

NOTE: Before you start a transaction, you must lock the session using the lock command in EXEC
mode. Otherwise, the conguration changes from other sessions get committed.
Example
OS10# start transaction
Supported Releases 10.3.1E or later
system
Executes a Linux command from within OS10.
Syntax
system command
Parameters command — Enter the Linux command to execute.
Default Not congured
Command Mode EXEC
Usage Information None
Example
OS10# system bash
admin@OS10:~$ pwd
/config/home/admin
admin@OS10:~$ exit
OS10#
Supported Releases 10.2.0E or later
system identier
Sets a non-default unit ID in a non-stacking conguration.
Syntax
system identifier system-identifier-ID
Parameters system-identifier-ID — Enter the system identier ID (1–9)
Default Not congured
Command Mode CONFIGURATION
Usage Information The system ID is displayed in the stack LED on the front panel.
Example
OS10(config)# system identifier 1
Supported Releases 10.3.0E or later
terminal
Sets the number of lines to display on the terminal and enables logging.
Syntax
terminal {length lines | monitor}
Parameters
• length lines — Enter the number of lines to display on the terminal (0 to 512, default 24).
• monitor — Enables logging on the terminal.
Getting Started 77