Users Guide

1022 1024
USER_IPV4_ACL Shared:1 G2 2 3
1021 1024
USER_IPV6_ACL Shared:2 G4 1 2
510 512
PBR_V6 Shared:2 G10 1 1
511 512
SYSTEM_FLOW Shared:2 G0 49 49
975 1024
ISCSI_SNOOPING Shared:1 G8 12 12
500 512
FCOE Shared:2 G6 55 55
457 512
-----------------------------------------------------------------------------------------
--------------
Egress ACL utilization
Hardware Pools
-----------------------------------------------------------------------------------------
--------------
Pool ID App(s) Used rows Free
rows Max rows
-----------------------------------------------------------------------------------------
--------------
0 USER_IPV4_EGRESS 2
254 256
1 USER_L2_ACL_EGRESS 2
254 256
2 USER_IPV6_EGRESS 2
254 256
3 USER_IPV6_EGRESS 2
254 256
-----------------------------------------------------------------------------------------
--------------
Service Pools
-----------------------------------------------------------------------------------------
--------------
App Allocated pools App group Configured rules Used rows Free
rows Max rows
-----------------------------------------------------------------------------------------
--------------
USER_L2_ACL_EGRESS Shared:1 G1 1 2
254 256
USER_IPV4_EGRESS Shared:1 G0 1 2
254 256
USER_IPV6_EGRESS Shared:2 G2 1 2
254 256
Known behavior
● On the S4200-ON platform, the show acl-table-usage detail command output lists several hardware pools as
available (FREE), but you will see an "ACL CAM table full" warning log when the system creates a new service pool. The
system will not be able to create any new service pools. The existing groups, however, can continue to grow up to the
maximum available pool space.
● On the S4200-ON platform, the show acl-table usage detail command output lists all the available hardware pools
under Ingress ACL utilization table and none under the Egress ACL utilization table. The system allocates pool space for
Egress ACL table only when you configure Egress ACLs. You can run the show acl-table-usage detail command
again to view pool space allocated under Egress ACL utilization table as well.
● On S52xx-ON, Z91xx-ON, Z92xx-ON platforms, the number of Configured Rules listed under Service Pools for each of the
features is the number of ACLs multiplied by the number of ports on which they are applied. This number is cumulative. You
can view the Used rows and Free rows that indicate the actual amount of space that is utilized and available in the hardware.
1248
Access Control Lists