Manualshelf

Users Guide

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S4112F-ON/S4112T-ON
151152153154155156157158159160
Table Of Contents
Parameters
● standard-timezone-name — Enter the standard time zone name that is supported in Linux. To
view a list of supported standard time zone names, see the Time zones and UTC offset reference
section.
● timezone-string — Enter the name of the time zone.
● hours — Enter the hour offset from UTC, ranging from -23 to 23.
● minutes — Enter the minute offset from UTC, ranging from 0 to 59.
Default Not configured
Command Mode CONFIGURATION
Usage
Information
The standard time zone option applies the predefined offset for the selected standard time zone,
including DST changes that apply to the local time. After you configure this command, OS10 uses the
updated local time in all logs and timestamps. You can use the ? character or press the tab key for
command completion and view a list of supported standard time zones. To view a list of supported
standard time zone names, see the Time zones and UTC offset reference section. Define region names
with a "/" at the end of the string. The "/" character indicates that a time zone string follows the region
name. For example, "Asia/Calcutta." The no form of the command resets the local time to UTC.
Supported on the MX9116n and MX5108n switches in Full Switch mode starting in release 10.4.0E(R3S).
Also supported in SmartFabric mode starting in release 10.5.0.1.
Example
OS10(config)# clock timezone standard-timezone Brazil/West
Supported
Releases
10.3.0E or later
show clock
Displays the current system clock settings.
Syntax
show clock
Parameters None
Default Not configured
Command Mode EXEC
Usage
Information
The universal time coordinated (UTC) value is the number of hours that your time zone is later or earlier
than UTC/Greenwich mean time.
Supported on the MX9116n and MX5108n switches in Full Switch mode starting in release 10.4.0E(R3S).
Also supported in SmartFabric mode starting in release 10.5.0.1.
Example
OS10# show clock
2017-01-25T11:00:31.68-08:00
Supported
Releases
10.2.1E or later
show clock timezone
Displays the time zone that is configured in the system.
Syntax
show clock timezone
Parameters None
Default Etc/UTC
Command Mode EXEC
Usage
Information
Supported on the MX9116n and MX5108n switches in Full Switch mode starting in release 10.5.0.0. Also
supported in SmartFabric mode starting in release 10.5.0.1.
154 System management