Users Guide

Port State : Master
Vlan :
Transport : Ipv4-multicast
Log Delay Request Minimum interval : -4
Log Announce Interval : 1
Announce Receipt Timeout Multiplier : 3
Log Sync Interval : -4
Delay Mechanism : End-to-end
Supported
Releases
10.5.1.0 or later
show ptp parent
Displays information about the local PTP parent and grandmaster clock.
Syntax
show ptp parent
Parameters None
Defaults None
Command Mode EXEC
Security and
Access
Netadmin and sysadmin
Usage
Information
This command is not applicable for transparent clocks.
Example
OS10# show ptp parent
Parent Clock Idenitity : 00:16:00:ff:fe:00:02:00
Parent Port Number : 1
Grandmaster Clock Identity : 00:16:00:ff:fe:00:02:00
Grandmaster Clock Quality
Class : 6
Accuracy : <=100ns
OffsetLogScaledVariance : 0
Grandmaster Clock Priority1 : 100
Grandmaster Clock Priority2 : 128
Supported
Releases
10.5.1.0 or later
show ptp peer
Displays the count of PTP messages received from a peer at an interface or transmitted to a peer from an interface.
Syntax
show ptp peer [{ethernet node/slot/port[:subport]} | {port-channel port-
channel-id}]
Parameters
● ethernet node/slot/port[:subport]—Enter the Ethernet interface information.
● port-channel port-channel-id—Enter the port channel interface number.
Defaults None
Command Mode EXEC
Security and
Access
Netadmin and sysadmin
Usage
Information
This command is not applicable for transparent clocks.
Example
OS10# show ptp peer
Interface : Ethernet1/1/22
198 System management