Users Guide

RSCN 0
ReqRx ReqTx AccRx AccTx RejRx RejTx ReqReTx
SW_RSCN 0 0 0 0 0 0 0
GE_PT 0 0 0 0 0 0 0
GE_ID 0 0 0 0 0 0 0
Supported
Releases
10.5.1.0 or later
show fc switch
Shows the multiswitch mode.
Syntax
show fc switch
Parameters None
Defaults Not applicable
Command Mode GLOBAL CONFIGURATION
Usage
Information
Use this command to display the current configured switch mode.
Example
OS10# show fc switch
Supported
Releases
10.5.1.0 or later
show interface fibre channel
Shows the fibre channel interface port type, BB_Credit, and other port configurations.
Syntax
show interface fibrechannel node/slot/port[:subport]
Parameters
node/slot/port[:subport]—Enter the interface information.
Defaults Not applicable
Command Mode INTERFACE CONFIGURATION
Usage
Information
Use this command to display the type of fibre channel port, E or F port, BB credit, WWPN, open status,
and other port statistics.
Example
OS10#show interface fibrechannel 1/1/1
Fibrechannel 1/1/1 is down, FC link is down
Address is 14:18:77:20:73:d0, Current address is 14:18:77:20:73:d0
Pluggable media present, SFP28 type is SFP28 25GBASE-SR
Wavelength is 850
Receive power reading is -2.378468 dBm
FC MTU 2188 bytes
LineSpeed 0
Operational Speed 0 over 20G
Port type is E_Port, Max BB credit is 8
WWN is 20:01:14:18:77:20:73:cf
Last clearing of "show interface" counters: 1 day 16:33:56
Input statistics:
0 frames, 0 bytes
0 class 2 good frames, 0 class 3 good frames
0 frame too long, 0 frame truncated, 0 CRC
0 link fail, 0 sync loss
0 primitive seq err, 0 LIP count
0 BB credit 0, 0 BB credit 0 packet drops
368 Fibre Channel