Users Guide

Example
OS10(config)# spanning-tree mst max-age 10
Supported
Releases
10.2.0E or later
spanning-tree mst max-hops
Configures the maximum hop count for a BPDU to travel before it is discarded.
Syntax
spanning-tree mst max-hops number
Parameters number — Enter a maximum hop value, from 6 to 40.
Default 20
Command Mode CONFIGURATION
Usage
Information
A device receiving BPDUs waits until the max-hops value expires before discarding it. When a device
receives the BPDUs, it decrements the received value of the remaining hops and uses the resulting value
as remaining-hops in the BPDUs. If the remaining MSTP 1333 hops reach zero, the device discards the
BPDU and ages out any information that it holds for the port. The command configuration applies to all
common IST (CIST) in the MST region.
Example
OS10(config)# spanning-tree mst max-hops 30
Supported
Releases
10.2.0E or later
show spanning-tree mst
Displays MST configuration information.
Syntax
show spanning-tree mst configuration
Parameters None
Default Not configured
Command Mode EXEC
Usage
Information
Enable MSTl before using this command.
Example
OS10# show spanning-tree mst configuration
Region Name: asia
Revision: 0
MSTI VID
0 1,7-4093
1 2
2 3
3 4
4 5
5 6
Supported
Releases
10.2.0E or later
show spanning-tree msti
Displays MST instance information.
Syntax
show spanning-tree msti [instance-number [brief | guard | virtual-interface |
interface interface]]
Layer 2 543