Users Guide

Example (IPv6)
OS10(conf-router-bgp-102)# neighbor 32::1
OS10(conf-router-neighbor)# address-family ipv6 unicast
OS10(conf-router-bgp-neighbor-af)# no sender-side-loop-detection
Supported
Releases
10.3.0E or later
show ip bgp
Displays information that BGP neighbors exchange.
Syntax
show ip bgp [vrf vrf-name] ip-address/mask
Parameters
● vrf vrf-name — (OPTIONAL) Enter vrf and then the name of the VRF to view route information
corresponding to that VRF.
● ip-address/mask — Enter the IP address and mask in A.B.C.D/x format.
Default Not configured
Command Mode EXEC
Usage
Information
None
Example
OS10# show ip bgp 1.1.1.0/24
BGP routing table entry for 1.1.1.0/24
Paths: (1 available, table Default-IP-Routing-Table.)
Received from :
3.1.1.1(3.3.3.33) Best
AS_PATH : 100
Next-Hop : 3.1.1.1, Cost : 0
Origin INCOMPLETE, Metric 0, LocalPref 100, Weight 0, confed-external
Route-reflector origin : 0.0.0.0
The following displays the next hop as an unnumbered neighbor with ethernet1/1/1 as the connected
interface.
OS10# show ip bgp 31.1.1.0/24
BGP routing table entry for 31.1.1.0/24
Paths: (1 available, table Default-IP-Routing-Table.)
Received from :
fe80::3617:ebff:fef1:dc5e via ethernet1/1/1 (1.1.1.1) Best
AS_PATH :
Next-Hop :ethernet 1/1/1 , Cost : 0
Origin INCOMPLETE, Metric 0, LocalPref 100, Weight 32768,
Route-reflector origin : 0.0.0.0
The following displays the next hop as an unnumbered neighbor with ethernet1/1/1 as the connected
interface.
OS10# show ip bgp
BGP local RIB : Routes to be Added , Replaced , Withdrawn
BGP local router ID is 14.233.209.106
Status codes: s suppressed, S stale, d dampened, h history, * valid, >
best
Path source: I - internal, a - aggregate, c - confed-external,
r - redistributed/network, S - stale
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf
Weight Path
682
Layer 3