Reference Guide

Default 32768
Command Mode CONFIGURATION
Usage
Information
Each device that runs LACP has an LACP system priority value. LACP uses the system priority with the
MAC address to form the system ID and also during negotiation with other systems. The system ID is
unique for each device. The no version of this command resets the system priority to the default value.
Example
OS10(config)# lacp system-priority 32768
Supported
Releases
10.2.0E or later
show lacp counter
Displays information about LACP statistics.
Syntax
show lacp counter [interface port-channel channel-number]
Parameters
● interface port-channel — (Optional) Enter the interface port-channel.
● channel-number — (Optional) Enter the LACP channel group number (1 to 128).
Default Not configured
Command Mode EXEC
Usage
Information
All channel groups display if you do not enter the channel-number parameter.
Example
OS10# show lacp counter interface port-channel 1
LACPDUs Marker Marker Response LACPDUs
Port Sent Recv Sent Recv Sent Recv Pkts Err
----------------------------------------------------------------
port-channel1
Ethernet1/1 554 536 0 0 0 0 0
Ethernet1/2 527 514 0 0 0 0 0
Ethernet1/3 535 520 0 0 0 0 0
Ethernet1/4 515 502 0 0 0 0 0
Ethernet1/5 518 505 0 0 0 0 0
Ethernet1/6 540 529 0 0 0 0 0
Ethernet1/7 541 530 0 0 0 0 0
Ethernet1/8 547 532 0 0 0 0 0
Ethernet1/9 544 532 0 0 0 0 0
Ethernet1/10 513 501 0 0 0 0 0
Ethernet1/11 497 485 0 0 0 0 0
Ethernet1/12 493 486 0 0 0 0 0
Ethernet1/13 492 485 0 0 0 0 0
--more--
Supported
Releases
10.2.0E or later
show lacp interface
Displays information about specific LACP interfaces.
Syntax
show lacp interface ethernet node/slot/port
Parameters node/slot/port — Enter the interface information.
Default Not configured
Command Mode EXEC
Usage
Information
The LACP_activity field displays if you configure the link in Active or Passive port-channel mode. The
Port Identifier field displays the port priority as part of the information including the port number. For
Layer 2 167