Reference Guide

● Enter standby to load the secondary OS10 image stored in the B partition.
Set next boot image
OS10# boot system standby
OS10# show boot
Current system image information:
===================================
Type Boot Type Active Standby Next-Boot
-------------------------------------------------------------------
Node-id 1 Flash Boot [A] 10.2.9999E [B] 10.2.9999E [B] standby
Filter show commands
You can filter show command output to view specific information, or start the command output at the first instance of a regular
expression or phrase.
display-xml Displays in XML format.
except Shows only text that does not match a pattern
find Searches for the first occurrence of a pattern and display all the subsequent configurations
grep Shows only text that matches a pattern
no-more Does not paginate output
save Saves the output to a file
Display all output
OS10# show running-configuration | no-more
Alias command
The alias command allows you to create shortcuts for commonly used or long commands, and execute long commands along
with their parameters.
The alias supports the following modes:
● Persistent mode — The alias is persistent and can be used in other sessions as well. The aliases created in the Configuration
mode are persistent.
● Non-persistent mode — The alias can be used only within the current session. Once the session is closed, the alias is
removed from the system. The aliases created in Exec mode are non-persistent.
NOTE:
You cannot use existing keywords, parameters, and short form of keywords as alias names, nor can you create a
shortcut for the alias command. The alias name is case-sensitive and can have a maximum of 20 characters.
● Create an alias in EXEC or CONFIGURATION mode — EXEC mode for non-persistent and CONFIGURATION mode for
persistent aliases. The alias value is the actual command where you can use $n to enter the input parameters. You can
substitute $n with either numbers ranging from 1 to 9 or with an asterisk (*) and enter the parameters while executing
the commands using the alias. Use asterisk (*) to represent any number of parameters. The maximum number of input
parameters is 9.
alias alias-name alias-value
● Execute the commands using the alias in the respective modes.
● View the current aliases.
show alias [brief | detail]
● Use the no form of the command to delete an alias.
no alias alias-name
44
Getting Started