Reference Guide

mTest Config line 1 "interface $1 $2"
line 2 "no shutdown"
line 3 "show configuration"
default 1 "ethernet"
default 2 "1/1/1"
Number of config aliases : 1
Number of local aliases : 0
Delete alias
OS10(config)# no alias mTest
Batch mode
Create and run a batch file to execute a sequence of multiple commands. A batch file is an unformatted text file that contains
two or more commands. Store the batch file in the home directory.
Use vi or any other editor to create the batch file, then use the batch command to execute the file. To execute a series
of commands in a file in batch mode (non-interactive processing), use the batch command. OS10 automatically commits all
commands in a batch file — you do not have to enter the commit command.
If a command in the batch file fails, batch operation stops at that command. The remaining commands are not executed.
●
Create a batch file (for example, b.cmd) on a remote device by entering a series of commands.
interface ethernet 1/1/1
no shutdown
no switchport
ip address 172.17.4.1/24
● Copy the command file to the home directory on the switch.
OS10# copy scp://os10user:os10passwd@10.11.222.1/home/os10/b.cmd home://b.cmd
OS10# dir home
Directory contents for folder: home
Date (modified) Size (bytes) Name
--------------------- ------------ ------
2017-02-15T19:25:35Z 77 b.cmd
...
● Execute the batch file using the batch /home/username/filename command in EXEC mode.
OS10# batch /home/admin/b.cmd
Jun 26 18:29:12 OS10 dn_l3_core_services[723]: Node.1-Unit.1:PRI:notice [os10:trap],
%Dell EMC (OS10) %log-notice:IP_ADDRESS_ADD: IP Address add is successful.
IP 172.17.4.1/24 in VRF:default added successfully
● (Optional) Verify the new commands in the running configuration.
OS10# show running-configuration interface ethernet 1/1/1
!
interface ethernet1/1/1
no shutdown
no switchport
ip address 172.17.4.1/24
Linux shell commands
You can execute a single command, or a series of commands using a batch file from the Linux shell.
48
Getting Started