Reference Guide

○ image://filename — Enter the path to install from a local file system.
○ usb://filepath — Enter the path to install from the USB file system.
Default All
Command Mode EXEC
Usage
Information
Use the show image status command to view the installation progress.
Example
OS10# image install ftp://10.206.28.174:/PKGS_OS10-Enterprise-10.3.2E.55-
installer-x86_64.bin
OS10# image install ftp://10.206.28.174:/PKGS_OS10-Enterprise-10.4.0E.55-
installer-x86_64.bin
Supported
Releases
10.2.0E or later
show boot
Displays boot partition-related information.
Syntax
show boot [detail]
Parameters detail — (Optional) Enter to display detailed information.
Default Not configured
Command Mode EXEC
Usage
Information
Use the boot system command to set the boot partition for the next reboot.
Example
OS10# show boot
Current system image information:
===================================
Type Boot Type Active Standby Next-Boot
---------------------------------------------------------
Node-id 1 Flash Boot [B] 10.2.0E [A] 10.2.0E [B] active
Example (Detail)
OS10# show boot detail
Current system image information detail:
==========================================
Type: Node-id 1
Boot Type: Flash Boot
Active Partition: B
Active SW Version: 10.2.0E
Active Kernel Version: Linux 3.16.7-ckt25
Active Build Date/Time: 2016-10-03T23:11:14Z
Standby Partition: A
Standby SW Version: 10.2.0E
Standby Build Date/Time: 2016-10-03T23:11:14Z
Next-Boot: active[B]
Supported
Releases
10.2.0E or later
show image status
Displays image transfer and installation information.
Syntax
show image status
System management 529