Reference Guide

show class-map
Displays configuration details of all existing class-maps.
Syntax
show class-map [type {control-plane | qos | queuing | network-qos} class-
map-name]
Parameters
● type — Enter the policy-map type (qos, queuing, or control-plane).
● qos — Displays all policy-maps of qos type.
● queuing — Displays all policy-maps of queuing type.
● network-qos — Displays all policy-maps of network-qos type.
● control-plane — Displays all policy-maps of control-plane type.
● class-map-name — Displays the QoS class-map name.
Default Not configured
Command Mode EXEC
Usage
Information
This command displays all class-maps of qos, queuing, network-qos, or control-plane type. The
class-map-name parameter displays all details of a configured class-map name.
Example
OS10# show class-map type qos c1
Class-map (qos): c1 (match-all)
Match(not): ip-any dscp 10
Supported
Releases
10.2.0E or later
show control-plane info
Displays control-plane queue mapping and rate limits.
Syntax
show control-plane info
Parameters None
Default Not configured
Command Mode EXEC
Usage
Information
Monitors statistics for the control-plane and to troubleshoot CoPP.
Example
OS10# show control-plane info
Queue Rate Limit(in pps) Protocols
0 600
1 1000
2 300
3 1300 VLT NDS
4 2000 IPV6_ICMP IPV4_ICMP
5 400 ARP_REQ ICMPV6_RS ICMPV6_NS ISCSI
6 600 ARP_RESP ICMPV6_RA ICMPV6_NA SSH TELNET TACACS
NTP FTP
7 400 RSTP PVST MSTP LACP
8 600 DOT1X LLDP FCOE
9 600 IPV6_OSPF BGP IPV4_OSPF
10 600 IPV6_DHCP IPV4_DHCP SERVICEABILITY VRRP
11 300 OPEN_FLOW OSPF_HELLO
Supported
Releases
10.2.0E or later
664 Quality of service